Basic Information

Overall Dimensions (mm)

10050×3400×3580

Front/Rear Overhang (mm)

1350/1100

Wheelbase (mm)

6200+1400

Wheel Track (Front/Middle/Rear) (mm)

2116/2118/2118

Approach/Departure Angle (°)

35/-

Curb Weight (kg)

11300

Maximum Permissible Gross Chassis Weight (kg)

25000

Maximum Permissible Axle Load (kg)

Front Axle: 7000, Middle & Rear Axles: 10000 + 10000

Rated Power (kW/r/min)

191/2200

Max Torque (N·m/r/min)

1025/1200

Displacement (L)

8.3

Max Speed (km/h)

93

Max Gradeability (%)

60

Minimum Ground Clearance (mm)

385(at axle housing bottom)

Minimum Turning Radius (m)

≤10

Fuel Consumption under Specific Conditions (L/100km)

＜22

Fuel Tank Capacity (L)

260

Theoretical Maximum Range (km)

≥600

Environmental Requirements

-20°C ~ +55°C; Altitude up to 5000m (accepting corresponding power reduction); Relative Humidity: 95% (at 30°C)

Basic Configuration

Engine

Cummins C260 In-line 6-cylinder, turbocharged and intercooled diesel engine, 191kW

Transmission

Manual 9-speed gearbox

Transfer Case

With high/low range and front axle engagement control, electro-pneumatic operation

Front Axle

7-ton rated solid axle, cast/stamped/welded housing, planetary wheel end reduction, with differential lock

Middle/Rear Axles

10-ton + 10-ton solid axles, cast/stamped/welded housing, planetary wheel end reduction, with differential lock

Cab

1.Occupancy area constructed with 6mm thick armored steel and 39mm protective glass, meeting EN1063-2000 (B6) and STANAG 4569 Level 1 ballistic standards.

2.Optional 4mm steel plate for non-occupancy areas at the front of the cab.

3.Driver's seat equipped with seat belt, adjustable fore/aft and backrest angle.

4.Cab area equipped with air conditioning.

5.Cab includes FM radio, audio player, wipers, and other electrical components.

6.Instrument cluster displays parameters like engine coolant temperature, engine RPM, vehicle speed, and air pressure.

Suspension

Front suspension: Leaf springs with two double-acting telescopic shock absorbers.Rear suspension: Leaf spring balanced suspension with six thrust rods and a stabilizer bar.

Tires

6 x 14.00R20 off-road tires, plus 1 spare tire. Middle and rear axles use single tires. Optional 6 bulletproof inner support rings for tires. Optional Central Tire Inflation/Deflation System (CTIS).

Frame

Stamped and riveted frame structure, maximum outer width 860mm.

Electrical System

24V circuit. Batteries: 2 x 12V, 165Ah.

Other Chassis Features

Hydraulic clutch booster, hydraulic power steering, exhaust brake, multi-circuit air brake system. Front and rear tow hooks. On-board tools and fire extinguisher.

Rescue & Special Equipment

1.Hydraulic lifting/crane system mounted behind cab and on body support, 360°rotation, with 4 hydraulic outriggers, capable of lifting 16 tons.

2.Crane arm can extend to 9 meters, max lifting angle 60°; can lift 1600kg at 0°when fully extended.

3.Front winch with max 25-ton rescue capacity.

4.Rear high-strength tow hook capable of 25-ton towing.

5.Equipped with special rescue equipment: shovel, wooden rollers, sledgehammer, chain hoist, simple fuel tank sling, etc.

6.Cab equipped with yellow rotating warning light.

Special Protection

Optional fuel tank protection using 6mm armored steel on the side and bottom.

Drive Configuration

Part-time 6x6 drive, with inter-wheel and inter-axle differential locks.

Vehicle Purpose

Suitable for vehicle rescue in various complex road conditions.

Lifting System

Max Hoisting Capacity (kg) (Superstructure/Complete Vehicle)

16000/7340

Max Hoisting Capacity at Full Extension (kg) (Superstructure/Complete Vehicle)

6900/5250

Lifting Arm Max Effective Length (mm)

3260

Lifting Arm Telescopic Stroke (mm)

1639

Lifting Angle with Load (°)

-10～16

Folding Angle Range (°)

-10～93

Fork Head Height at Full Extension (mm)

1700

Crane System

Max Lifting Capacity (kg)

25000

Capacity at 30° & Fully Retracted (kg)

10000

Capacity at 30° & Fully Extended (kg)

4500

Boom Base Length (mm)

4800

Cylinder Telescopic Stroke (mm)

2500x2=5000

Max Lifting Height (mm)

10100

Max Working Radius (mm)

9100

Number of Boom Sections

2

Boom Luffing Angle (°)

0--55

Slewing Angle (°)

360 continuous rotation

Winches

Quantity

2

Rated Pulling Force per Winch (k·N)

150

Wire Rope Specification

18-6X19S-FC1870BZS

Wire Rope Diameter (mm)

8

Wire Rope Length (m)

45

Minimum Rope Speed (m/min)

5

Outriggers

Front Outrigger Type

H-type

Rear Outrigger Type

L-type

Front Outrigger Lateral Span (mm)

5110

Rear Outrigger Lateral Span (mm)

4076

Front/Rear Outrigger Longitudinal Span (mm)

7100